You won't waste a lot of time learning to use this compact, 300dpi dye-sublimation photo printer. Devoid of any on-printer controls other than a standby button, the Sony PictureStation DPP-FP30 is strictly a plug-it-in-and-print component. There is no memory card slot, LCD preview screen, or built-in battery to fuss with. Just connect it to your Windows computer or PictBridge-compatible digital camera and you'll get good-quality 101x152mm or 89x127mm borderless prints in about 90 seconds. Though not as economical as some other photo printers (competing models such as the HP Photosmart 375 and Epson PictureMate can deliver prints at about half the cost), and lacking many of their features, this model is inexpensive and deserves a look if you want great prints and an easy photo-printing solution.
We've owned toasters that were more complicated to set up and use than the Sony PictureStation DPP-FP30. At 177 by 76 by 127mm and 1kg without its separate AC adaptor and paper tray, the printer can be taken anywhere and readied for action in seconds. While it's compact, you'll need to allot about 177mm at the front for the paper tray and 76mm behind for clearance (the paper cycles through the device four times during printing). Plug in the power, flip down the front paper tray, snap in the 20-sheet cassette (which doubles as a tray to accept finished prints), link the printer to your PC or PictBridge-compatible digital camera, and you're ready to go. You can print anywhere there's an AC outlet, but the PictureStation doesn't have a battery pack for truly on-the-go printing.
Both the paper tray and the ink cartridge slide into place easily. Connectors on the back accept the AC power cord and the USB cable to your computer, and both are positioned so that they don't interfere with the paper's paper path. A port on the side accepts a USB cable from your camera for direct printing. Both jacks cannot be used at the same time, so you'll need to unplug your camera or printer when using the other printing source.
The only printer control is a standby button that wakes up the device, then puts it back to sleep when you're done printing. There's no LCD on the printer; you'll have to keep your eye on three status LEDs. One turns green when the printer is ready to print, switches to red when it's on standby, and flashes when printing is in process. A second LCD lights up or flashes, depending on whether the camera is or isn't PictBridge-compatible. The third LED helps with troubleshooting: It illuminates or flashes cryptic error codes if the paper tray isn't inserted or if the printer is running low on paper. Slow or rapid flashing indicates a depleted ink cartridge, no ink cartridge, a paper jam, or other malfunction.Features
You'll need to install the printer driver and the bundled PictureGear Studio software to modify print settings for the Sony PictureStation DPP-FP30. For PC output (the unit is not Macintosh compatible), you'll find the driver as minimalist as the printer itself. You can choose either of two paper sizes for bordered or borderless printing. You can print portrait or landscape orientations, rotate the image 180 degrees, enlarge to 200 percent or reduce to 50 percent. You can also select from 1 to 20 copies. A second tab in the driver window lets you adjust colour balance or sharpness, choose picture quality, or activate red-eye reduction.
You can also specify the printing options your digital camera offers when printing directly from a PictBridge-compliant camera. Most of the time you'll want to make changes in your own image-editing software or with the PictureGear Studio software. The bundled software includes simple organisational features as well as wizards for creating postcards, calendars, and other projects.
The Sony PictureStation DPP-FP30 takes four passes per print: it applies yellow, magenta, and cyan, followed by a SuperCoat 2 laminate layer that protects the print from fingerprints, moisture, and fading. Because dye-sub printers always deliver the exact number of prints specified from each ink ribbon/paper pack combination, no ink gauge is needed -- you'll know it's time to replenish your supplies when the paper runs out.Performance
The Sony PictureStation DPP-FP30 performed quite well in CNET Labs' speed tests, averaging 1.5 minutes per 101x152mm photo. It's not as fast as the competing Dell Photo Printer 540, but the DPP-FP30 performs well above average. The printer worked though our testing process very smoothly and quietly without any problems at all.
Only a mild, yellow cast marred the quality of our test prints, which displayed well-saturated colours and accurate flesh tones. The 300dpi resolution meant that a faint dot pattern was visible under 10X magnification, but we didn't see any objectionable jaggies in diagonal lines.
(Shorter bars indicate better performance)
||Minutes per photo|
CNET Labs project leader Dong Ngo contributed to this section of the review.
Sony also offers product support and a searchable knowledge base through its Web site. Unfortunately, when we searched for information about this printer, we repeatedly came up empty-handed. If you follow the Service & Support link from the site, click Digital Imaging Products, and search by product, the PictureStation DPP-FP30 doesn't show up in the drop-down product list. We did find operating instructions for the printer by typing DPP-FP30 into the Sony IQ Reference Library search, though only after we struck out using the full product name (PictureStation DPP-FP30). Sony should make it easier to find relevant product information.
Edited by Rebecca Viksnins
Additional editing by Tom Espiner